GBT-1000 - 2 Meter Parkson

dewatering

Gravity Belt Thickener is a 2.2 meter; skid mounted thickener.
The skid complete with; an automated flash blending polymer units, boost water pump, electronic controls, and a sludge discharge chute.
The GBT has a patented pressure plate installed at the end of the Gravity Zone to apply pressure to sludge at an adjustable rate.
The press will require a 480 three phase, 100 amp breaker power supply.
Water requirements for the press is fresh water at 50 gpm (35 gpm for spray bar) and 40 and up psi.
Hoses for sludge feed are available upon request